|
|
Mitel Cordless Handset and Module Kit
The Cordless Handset 50005713 is designed to fit into the current
handset cradle of the 5330 and 5340 IP Phones. The Cordless Handset is intended
to be an accessory that is purchased separately from the phone and installed in
the field. The charging plate for the Cordless Handset is field retrofitable.
The Cordless Handset will charge as long as it is sitting in the handset cradle
of the 5330 or 5340 IP Phone. RRP Price: £150.00
New Price: £120.45 (Excl. VAT)
Refurbished Price:
Discount RRP:
Make Call / Answer Call / End Call Key
Allows users to remotely initiate a call, answer a call or end a call
with the touch of a button.
Volume Up /
Volume Down
The volume keys function the same as
the volume keys on the phone.
Mute
The mute key functions exactly
the same as the mute button on the phone itself. By pressing the mute key, users
are able to mute the call, until the mute key is pressed again to enable the
microphone on the handset.
Handset Rings
Independently of the Phone
Another key feature of
the Cordless Handset is the ability to have the handset ring on incoming calls,
even when it out of the phone’s handset cradle. If you are out of hearing
distance of the phone, you will still not miss any calls if you have the
Cordless Handset with you. It is also a great feature for locating your Cordless
Handset if you have inadvertently put it down somewhere other than in the cradle
or on your desk. Simply call your own phone number, and the handset will also
ring!
Visual Indicators for On-hook,
Off-hook, Mute, Connectivity, Charging and Low Battery
Visual indicators are provided on the Cordless Accessories Module,
Cordless Handset and Cordless Headset for a variety of functions.
- OnLine (handset is synched with base station)
- Muted
- Battery Low
- Off – battery dead or handset not synched with base
station
Supported Phones:
The
Cordless Accessories Module, Cordless Handset and Cordless Headset are supported
on the 5330 and 5340 IP Phones.
Minimum
System Software Requirements
- The 3300 ICP minimum system software required to support
the Cordless Handset and Cordless Headset is 3300 Software Release 8.0,
UR1.
- The SX-200 ICP minimum system software required to support
the Cordless Handset and Cordless Headset is SX-200 ICP Release 4.0 UR3.
- Mitel Teleworker Solution Release 4.5 contains the set
firmware load that supports the Cordless Accessories Module on a Teleworker
Solution phone.
|
|
|
|
Mitel Cordless Accessories Datasheet
